Filter
Top Products
Page 4
SKU 97925, 99676
For technical questions, please call 1-800-444-3353.
Use safety equipment. Always wear ANSI-approved eye protection. b. Safety
equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protec-
tion used for appropriate conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in the off-position before con-c.
necting to power source and/or battery pack, picking up or carrying the tool. Car-
rying power tools with your nger on the switch or energizing power tools that
have the switch on invites accidents.
Remove any adjusting key or wrench before turning the power tool on. A wrench d.
or a key left attached to a rotating part of the power tool may result in personal
injury.
Do not overreach. Keep proper footing and balance at all times. This enables e.
better control of the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing f.
and gloves away from moving parts. Loose clothes, jewelry or long hair can be
caught in moving parts.
If devices are provided for the connection of dust extraction and collection facili-g.
ties, ensure these are connected and properly used. Use of these devices can
reduce dust-related hazards.
Power tool use and care4.
Do not force the power tool. Use the correct power tool for your application. The a.
correct power tool will do the job better and safer at the rate for which it was de-
signed.
Do not use the power tool if the switch does not turn it on and off. Any power tool b.
that cannot be controlled with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or the battery pack from the pow-c.
er tool before making any adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk of starting the power tool
accidentally.
Store idle power tools out of the reach of children and do not allow persons unfa-d.
miliar with the power tool or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or binding of moving parts, break-e.
age of parts and any other condition that may affect the power tool’s operation. If
damaged, have the power tool repaired before use. Many accidents are caused
by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp f.
cutting edges are less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc. in accordance with these g.
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended
could result in a hazardous situation.