Filter
Top Products
Page 2SKU 42818
Specifications
ITEM DESCRIPTION
Power Consumption
110 VAC, 60 Hz, 1500 Watts, 2 HP
No load: 3A; Load: 6A; Startup: 8A
Power Cord 7 feet, UL approved, 16 AWG, polarized prongs
Motor Speed 4800 RPM
Fence Dimensions 22-3/4 x 2-1/2 inches
Table Dimensions 22-7/8 (W) x 4-1/4 (H) inches
Table Positive Stops 0, 15, 22.5, 30, 45 (left and right) degree miter
Cutting Capacity
3-11/16 (D) x 12-3/16 (L) inches at 90 deg. (front
to back); 1-1/4 (D) x 12-3/16 (L) inches at 45 deg.
(front to back)
Maximum Blade Height 17-7/8 inches
Saw Blade Tilt Capacity
90 to 45 degrees (right and left) miter
90 to 45 (right and left) degrees compound
Shaft Diameter 1 inch arbor
Miter Scale 0 ~ 60 degrees in one degree increments
Saw Blade 12 inch, carbide tipped, 100 tooth
Features
Push-down lock
Retractable blade guard
Single slide bar extension
Accessories
Dust collector bag, Set Plate, Set Plate Holder,
Arbor Nut Wrench, Hex Wrench, 4 MM, Arbor
Adaptor 5/8" to 1"
Net Weight 53 lbs
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to re-
duce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use machines or power tools in damp or wet
locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically
powered tools in the presence of flammable gases or liquids.