Filter
Top Products
SKU 91835 Page 3
6. Dress properly when working. Do not wear loose clothing or jewelry as they
can be caught in moving parts. Protective, electrically non-conductive clothes
and non-skid footwear are recommended when working. Wear restrictive hair
covering to contain long hair.
7. Use eye and ear protection. Always wear ANSI approved impact safety goggles.
Wear a full face shield if you are producing metal filings or wood chips. Wear an
ANSI approved dust mask or respirator when working around metal, wood, and
chemical dusts and mists.
8. Do not overreach. Keep proper footing and balance at all times. Do not reach
over or across running machines.
9. Maintain tools with care. Keep tools sharp and clean for better and safer
performance. Follow instructions for lubricating and changing accessories. Inspect
tool cords periodically and, if damaged, have them repaired by an authorized
technician. The handles must be kept clean, dry, and free from oil and grease at
all times.
10. Keep your Work Bench surface clean and orderly. A messy or dirty work
surface invites accidents. Store work pieces and tools properly, and keep this
workbench surface clear and clean for each project you work on.
11. Stay alert. Watch what you are doing, use common sense. Do not operate any
tool when you are tired.
12. Take caution as some woods contain preservatives such as copper
chromium arsenate (CCA) which can be toxic. When cutting these materials
extra care should be taken to avoid inhalation and minimize skin contact.
13. Check for damaged parts. Before using any product, any part that appears
damaged should be carefully checked to determine that it will operate properly
and perform its intended function. Check for alignment; any broken parts or
mounting fixtures; and any other condition that may affect proper operation. Any
part that is damaged should be properly repaired or replaced by a qualified
technician.
14. Guard against electric shock when using electric tools. Prevent body contact
with grounded surfaces such as pipes, radiators, ranges, and refrigerator
enclosures.
15. Replacement parts and accessories. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use
accessories intended for use with this tool. Approved accessories are available
from Harbor Freight Tools.