Hitachi CB 13F Saw User Manual


 
7
ACCESSORIES AND ATTACHMENTS
RECOMMENDED ACCESSORIES
WARNING
To avoid injury:
Use only accessories recommended for this band saw.
Follow instructions that accompany accessories. Use
of improper accessories may cause hazards.
CARTON CONTENTS
UNPACKING AND CHECKING CONTENTS
Carefully unpack the band saw and all its parts, and
compare against the illustration following. Place the saw
on a secure surface and examine it carefully.
WARNING
To avoid injury from unexpected starting, do not plug
the power cord into a power source receptacle during
unpacking and assembly. This cord must remain
unplugged whenever you are assembling or adjusting
the saw.
Although compact, this saw is heavy. To avoid back
injury, get help whenever you have to lift the saw.
If any part is missing or damaged, do not plug the
band saw in until the missing or damaged part is
replaced, and assembly is complete.
Use only accessories designed for this band saw to
avoid injury from thrown broken parts or workpieces.
Do not use any accessory unless you have completely
read the instruction or operators manual for that
accessory.
ITEM
Blade width: 1/8,1/4,3/8,1/2
Blade length: 80
TABLE OF LOOSE PARTS
ITEM DESCRIPTION QUANTITY
BAND SAW:
A. Band saw with motor 1
B. Table with extension wing 1
C. Trunnion support bracket 1
D. Miter gauge 1
E. Sawdust port 1
F. Power cord hooks 2
Foot pads 4
G. Hex. Bolt & nuts 1
H. Hex. Bolt 4
I. Knobs 2
J. Hex. Key 1
K. Screws 2
L. Long hex. Bolt 1
M. Hex. Nuts 4
N. Large washers 8
LEG STAND:
O. Leg stand top plate 1
P. Short lower brackets 2
Q. Long lower brackets 2
R. Legs 4
S. Bag:
Carriage bolts 32
Hex. Nuts 32
Washers 32