Filter
Top Products
10
English
APPLICATIONS
⅜ Cuttiing various types of metallic materials such as Steel pipes, Rectangular pipes, Shaped Steel and
Round bars.
WARNING: To prevent an accident and personal injury, do not cut except for uses as stainless, hardened
steel, thin walled shape steel (less t2.0) and so on.
PREPARATION BEFORE OPERATION
Make the following preparations before operating the power tool:
1. Installation
Secure the machine on a level flat surface, and keep it in a stable condition.
2. Grounding Instructions.
In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric
current to reduce the risk of electric shock.
This power tool is equipped with an electric cord having an equipment-grounding conductor and a plug
with a grounding pin, as shown in Fig. 4. The plug must be plugged into a matching receptacle that is
properly installed and grounded in accordance with all local codes and regulations.
Do not modify the provided plug if it does not fit the receptacle.
Have a proper receptacle installed by a qualified electrician.
Improper connection of the equipment-grounding conductor can result in a risk of electric shock. The
equipment-grounding conductor is the one with the green outer insulation (with/without yellow stripes).
If repair or replacement of the electric cord or plug is necessary, do not connect the equipment-grounding
conductor to a live terminal.
Check with a qualified electrician or serviceman if the grounding instructions are not completely
understood, or if in doubt as to whether the tool is properly grounded.
Use only 3-core extension cords that have 3-prong grounding plugs and 3-pole receptacles that accept
the tool’s plug.
Repair or replace damaged or worn cord immediately. This power tool is intended for use on a circuit
with an receptacle similar to the one illustrated in sketch A, Fig. 4. A temporary adapter, similar to the
one illustrated in sketches B and C, may be used to connect the power tool plug to a 2-pole receptacle
as shown in sketch B in case a properly grounded receptacle is not available.
The temporary adapter should be used only until a properly grounded receptacle has been installed by
a qualified electrician. The green-colored grounding lug extending from the adapter must be connected
to a permanent ground such as a properly grounded receptacle box.
WARNING: Always connect the power tool to a grounded metal, permanent wiring system: or to
a system having an equipment-grounding conductor.
Fig. 4
Power Tool’s Plug
Grounding Pin
Adapter
Grounding Methods
Cover of
grounded
receptacle Box
(A)
(B)
(C)
Grounding Lug