Filter
Top Products
English
10
Information concerning airborne noise and vibration
The measured values were determined according to
EN60745 and declared in accordance with ISO 4871.
Measured A-weighted sound power level: 96 dB (A).
Measured A-weighted sound pressure level: 85 dB (A).
Uncertainty KpA: 3 dB (A).
Wear hearing protection.
Vibration total values (triax vector sum) determined
according to EN60745.
Cutting wood:
Vibration emission value
ah, CW = 9.0 m/s
2
Uncertainty K = 1.5 m/s
2
Cutting sheet metal:
Vibration emission value
ah, CM = 13.2 m/s
2
Uncertainty K = 1.5 m/s
2
The declared vibration total value has been measured in
accordance with a standard test method and may be used
for comparing one tool with another.
It may also be used in a preliminary assessment of
exposure.
WARNING
⅜ The vibration emission during actual use of the power
tool can differ from the declared total value depending
on the ways in which the tool is used.
⅜ To identify safety measures to protect the operator
that are based on an estimation of exposure in the
actual conditions of use (taking account of all parts of
the operating cycle such as the times when the tool is
switched off and when it is running idle in addition to
the trigger time).
NOTE:
⅜ The minimum cutting radius of No. 1 (Long), No. 1 (Super Long), No. 21, No. 22 and No. 41 blades is 100 mm.
Table 1 List of appropriate blades
Material
Blade
No. 1 No. 1
No.11
No. 12,
No. 15
No. 16,
No. 21 No. 22 No.41 No. 97
123X
to be cut
(Long)
(Super Long)
42 46
Material quality Thickness of material (mm)
Lumber
General lumber
Below Below 10 ∼ Below 10 ∼ 5 ∼ 10 ∼
90 90 55 20 55 40 65
Plywood
5 ∼ Below 5 ∼ 3 ∼
30 10 30 20
Iron plate
Mild steel plate
3 ∼ Below 2 ∼ 1.5 ∼
63 58
Stainless steel plate
1.5 ∼
2.5
Nonferrous
Aluminium copper,
3 ∼ Below Below
metal
brass
12 3 5
Aluminium sash
Height Height Height
up to up to up to
25 25 30
Plastics
Phenol resin, melamine, 5 ∼ Below 5 ∼ Below 5 ∼
resin, etc. 20 6 15 6 15
Vinyl chloride, 5 ∼ Below 5 ∼ Below 5 ∼ 3 ∼ 5 ∼
acryl resin, etc. 30 10 20 5 30 20 15
Foamed polyethylene, 10 ∼ 3 ∼ 5 ∼ 3 ∼ 10 ∼ 3 ∼ 5 ∼
foamed styrol 55 25 25 25 55 40 25
Pulp
Card board, 10 ∼ 3 ∼ 10 ∼ 3 ∼
corrugated paper 55 25 55 40
Hardboard
3 ∼ Below 3 ∼
25 6 25
Fiberboard
Below
6
01Eng_CJ90VST_WE 4/11/10, 21:1510