22
English
Use for wood
engraving and
grinding.
Use to machine hard
materials such as
glass and ceramics.
Use to engrave,
grind and make
grooves in wood,
plastic and soft
metals (aluminium,
copper, brass).
Use to make
holes in wood and
plywood.
Use to slice or cut
materials.
Suitable for cutting
thin rods and pipes.
Recuts crushed
grooves in screw
heads.
Do not press hard
against workpiece
as it may crack.
Use to polish hard
materials such as
stainless steel.
Suitable for fi nal
polishing after rough
grinding.
Use to give smooth
fi nish to metal
surfaces.
Use for mirror
polishing of jewelry
and metals.
Choose the size to
suit the workpiece.
Suitable for tasks
such as shaping
wood and fi nishing
models.
Grind in two stages
with diff erent grit
numbers to achieve
a good surface
fi nish.
Aluminium oxide point [5/8˝ (φ15.9 mm) × 1]
5/8˝
(15.9 mm)
Silicon carbide point [3/16˝ (φ4.8 mm) × 1]
3/16˝
(4.8 mm)
High-speed cutter [1/8˝ (φ3.2 mm) × 1]
1/8˝
(3.2 mm)
Drill [1/8˝ (φ3.2 mm) × 1]
1/8˝
(3.2 mm)
Felt polishing wheel [1/2˝ (φ12.7 mm) × 4]
1/2˝
(12.7 mm)
Felt polishing wheel [1˝ (φ25.4 mm) × 2]
1˝
(25.4 mm)
Sanding band [1/2˝ (φ12.7 mm)/60-grit × 6]
1/2˝
(12.7 mm)
60-grit
Sanding band [1/2˝ (φ12.7 mm)/120-grit × 2]
1/2˝
(12.7 mm)
120-grit
Cutting wheel [15/16˝ (φ23.8) × 0.025˝ (t0.6) × 6]
15/16˝
(23.8 mm)
0.025˝ (0.6 mm)
Cutting wheel [15/16˝ (φ23.8) × 0.040˝ (t1.0) × 2]
15/16˝
(23.8 mm)
0.040˝ (1.0 mm)
Aluminium oxide grinding wheel
[7/8˝ (φ22.2) × 1]
7/8˝
(22.2 mm)
Sanding disc [3/4˝ (φ19.1 mm)/180-grit × 10]
3/4˝
(19.1 mm)
180-grit
Polishing wheel [1˝ (φ25.4 mm) × 2]
1˝
(25.4 mm)
Collet spanner (for loosening
tight collet nuts)
Wheel mandrel
[1/8˝ (φ3.2 mm) × 1]
Screw-type mandrel
[1/8˝ (φ3.2 mm) × 1]
Drum mandrel
[1/8˝ (φ3.2 mm) × 1]
<Uses>
[Accessory]
Provided attachments
CAUTION
Standard attachments are
exclusively for use with the
GP10DL. Do not use with other
equipment such as electric
drills, etc. Doing so may result in
injury or damage to the tip tool.
NOTE
Specifi cations are subject to change without any obligation on the part of the HITACHI.