Filter
Top Products
8
English
8. Handle tool correctly.
Operate the tool according to the instructions
provided herein. Do not drop or throw the tool.
Never allow the tool to be operated by children,
individuals unfamiliar with its operation or
unauthorized personnel.
9. Keep all screws, bolts and covers tightly in
place.
Keep all screws, bolts, and plates tightly
mounted. Check their condition periodically.
10. Do not use power tools if the plastic
housing is cracked.
Cracks in the tool’s housing or handle can lead
to electric shock. Such tools should not be used
until repaired.
11. Accessories must be securely mounted to
the tool.
Prevent potential injuries to youself or others.
Blades, cutting implements and accessories
which have been mounted to the tool should be
secure and tight.
12. Keep motor air vent clean.
The tool’s motor air vent must be kept clean so
that air can freely fl ow at all times. Check for
dust build-up frequently.
13. Never use a tool which is defective or
operating abnormally.
If the tool appears to be operating unusually,
making strange noises, or otherwise appears
defective, stop using it immediately and arrange
for repairs by a Hitachi authorized service
center.
14. Never leave tool running unattended. Turn
power off .
Don’t leave tool until it comes to a complete
stop.
15. Carefully handle power tools.
Should a power tool be dropped or struck
against hard materials inadvertently, it may be
deformed, cracked, or damaged.
16. Do not wipe plastic parts with solvent.
Solvents such as gasoline, thinner benzine,
carbon tetrachloride, and alcohol may damage
and crack plastic parts. Do not wipe them with
such solvents.
Wipe plastic parts with a soft cloth lightly
dampened with soapy water and dry
thoroughly.
17. Never use the grinder in places where the
sparks generated by the grinder can cause
explosion, such as where fl ammable materials
or gases are present.
18. Never push in the push button while the spindle
is running.
19. Always wear eye protection that meets the
requirement of the latest revision
of ANSI Standard Z87.1.
20. Always wear a mank or respirator to protect
yourself from dust or potentially harmful
particles generated during the grinding
operation.
21. Always be careful with buried objict such as an
underground wiring.
Touching these active wiring or electric cable
with this tool, you may receive an electric
shock.
Comfi rm if there are any buried object such as
electric cable within the wall, fl oor or ceiling
where you are going to operate here after.
22. Defi nitions for symbols used on this tool
V ............ volts
—
---
......... direct current
Hz .......... her tz
A ............ amper es
no ..........no load speed
---/min ... revolutions or reciprocation per minute
IMPORTANT SAFETY
INSTRUCTIONS FOR BATTERY
CHARGER
WARNING
Death or serious bodily injury could result
from improper or unsafe use of battery
chargers. To avoid these risks, follow these
basic safety instructions:
READ ALL INSTRUCTIONS
1. This manual contains important safety and
operating instructions for battery charger model
UC10SFL.
2. Before using battery charger, read all
instructions and cautionary markings on (1)
battery charger, (2) battery, and (3) product
using battery.
3. To reduce risk of injury, charge HITACHI
rechargeable battery type BCL1015. Other type
of batteries may burst causing personal injury
and damage.
4. Do not expose battery charger to rain or snow.
5. Use of an attachment not recommended or
sold by the battery charger manufacturer may
result in a risk of fi re, electric shock, or injury to
persons.