Filter
Top Products
English
17
ACCESSORIES
WARNING: ALWAYS use Only authorized HITACHI replacement parts and
accessories. NEVER use replacement parts or accessories which are
not intended for use with this tool. Contact HITACHI if you are not sure
whether it is safe to use a particular replacement part or accessory
with your tool. The use of any other attachment or accessory can be
dangerous and could cause injury or mechanical damage.
NOTE:
Accessories are subject to change without any obligation on the part of the HITACHI.
STANDARD ACCESSORIES
1. Model M12VC, M12SC
(1) 1/4” Collet Chuck (Code No. 323-293)
(2) Template Guide Adapter (attaches
to the router) (Code No. 323-272)
(3) Centering Gauge (Code No. 323-296)
(4) 16 mm Wrench (Code No. 323-294)
(5) 23 mm Wrench (Code No. 323-295)
2. Model KM12VC, KM12SC
(1) 1/4” Collet Chuck (Code No. 323-293)
(2) Template Guide Adapter (attaches to
the router) (Code No. 323-272)
(3) Centering Gauge (Code No. 323-296)
(4) 16 mm Wrench (Code No. 323-294)
(5) 23 mm Wrench (Code No. 323-295)
(6) Large Hole Sub Base (Code No. 323-297)
(7) Template Guide (Fig. 19)
(8) Lock Nut (Code No. 323-305)
(9) Chip Cover (Code No. 323-292)
(10)Case (Code No. 323-358)
Code
ABC
No.
323-298
1/4” 5/16” 5/32”
(6.5 mm) (8 mm) (4 mm)
323-299
9/32” 3/8” 5/16”
(7 mm) (9.5 mm) (8 mm)
323-300
11/32” 7/16” 5/32”
(8.7 mm) (11.1 mm) (4 mm)
323-301
13/32” 1/2” 5/16”
(10.3 mm) (12.7 mm) (8 mm)
323-302
17/32” 5/8” 9/16”
(13.5 mm) (16 mm) (14.3 mm)
323-303
21/32” 3/4” 9/16”
(16.6 mm) (19.1 mm) (14.3 mm)
323-304
5/8” 51/64” 9/16”
(16 mm) (20.2 mm) (14.3 mm)
Fig. 19
A
B
C