Hitachi N3804AB Router User Manual


 
English
18
Warning Label
5. WARNING LABEL
Change the WARNING LABEL if missing
or damaged.
A new WARNING LABEL is available from
a Hitachi authorized service center.
4 Remove the jammed staple.
5 Put back the front nose and bridge piece with two bolts.
6 In case of frequent jam, contact a Hitachi authorized service center.
2. Maintenance chart (See page 19)
3. Operator troubleshooting (See page 20)
4. Storing
When not in use for an extended period, apply a thin coat of the lubricant to the steel parts
to avoid rust.
Do not store the Stapler in a cold weather environment.
Keep the Stapler in a warm area.
When not in use, the Stapler should be stored in a warm and dry place.
Keep out of reach children.
WARNING
SERVICE AND REPAIRS
Only service personnel trained by Hitachi, distributor or em-
ployer shall repair the Stapler.
Use only parts supplied or recommended by Hitachi for repair.
All quality Staplers will eventually require servicing or replacement of parts because of wear
from normal use.
NOTE:
Specifications are subject to change without any obligation on the part of HITACHI.