Hitachi NR90AE Nail Gun User Manual


 
English
9
SPECIFICATIONS
Model
Operating pressure
Dimensions
Length × Height × Width
Weight
Nail capacity
Air consumption
Air inlet
NR90AD (S) NR90AE (S)
70 – 120 psi (4.9 – 8.3 bar, 5 – 8.5 kgf/cm
2
)
18-3/16" × 12-11/16" × 4-15/16" 20-3/4" × 12-11/16" × 4-15/16"
(462 mm × 322 mm × 125 mm) (527 mm × 322 mm × 125 mm)
7.0 lbs. (3.2 kg) 7.5 lbs. (3.4 kg)
50 – 74 nails (2 strips) 64 – 70 nails (2 strips)
.088 ft
3
/cycle at 100 psi
(2.5 ltr/cycle at 6.9 bar)
(2.5 ltr/cycle at 7 kgf/cm
2
)
3/8 NPT Thread
NAIL SELECTION
WARNING
Be sure to use only the genuine HITACHI nails for the NR90AD (S)
or the NR90AE (S). The use of any other nails can result in tool
malfunction and/or nail breakdown, leading to serious injuries.
Only nails shown in the Table below can be driven with this Nailer.
.148"
(3.8 mm)
3-1/2" (90 mm)
.303"
(7.7 mm)
.113"
(2.9 mm)
2" (50 mm)
.266"
(6.8 mm)
NR90AD (S)
Paper collated strip nails Min. Max.
Clipped-head nails
01Eng_NR90AD(S)_US 11/19/10, 2:16 PM9