Filter
Top Products
English
10
2. Battery Charger (UC18YRSL)
SPECIFICATIONS
1. Cordless Impact Driver/Wrench
2. Battery Charger (UC 18YRSL)
Fig. 2
Pilot lamp
Cord
Nameplate
Guide rail
Input power source Single phase: AC 120 V 60 Hz
Charging time Approx. 45 min.
Charging voltage DC 14.4 V – 18 V
Charger
Charging current
DC 14.4 V: DC 3.5 A
DC 18 V: DC 3.5 A
Weight 1.3 lbs. (0.6 kg)
NOTE: The charging time may vary according to temperature and power source voltage.
Model WH18DSDL WR18DSDL
No-load speed
Power mode 0 – 2,600/min
Save mode 0 – 2,000/min
Small screw 5/32" – 3/8" (M4 – M10)
Capacity Ordinary bolt 1/4" – 9/16" (M6 – M14) 3/8" – 23/32" (M10 – M18)
High tension bolt 1/4" – 15/32" (M6 – M12) 5/16" – 9/16" (M8 – M14)
Tightening torque
(Maximum)
Bit shank size 1/4" (6.35 mm) Hex. 1/2" (12.7 mm) square
Rechargeable battery BSL1830: Li-ion 18 V (3.0 Ah)
Weight 3.7 lbs. (1.7 kg)
Power mode 1,510 in-lbs.
{170 N·m}
Save mode 840 in-lbs.
{95 N·m}
Tightening is 9/16" (M14) high
tension bolt, when fully charged
at 68°F (20°C) temp.
Tightening time: 3 sec.
Power mode 188 ft·lbs.
{255 N·m}
Save mode 103 ft·lbs.
{140 N·m}
Tightening is 5/8" (M16) F10T,
when fully charged at 68°F
(20°C) temp.
Tightening time: 5 sec.
01Eng_WH18DSDL_US.p65 11/19/12, 1:19 PM10