Filter
Top Products
. A complete Parts List is available at www.HobartWelders.com
OM-925 Page 16
5-7. Installing Wire Spool And Adjusting Hub Tension
When a slight force is needed
to turn spool, tension is set.
1/2 in
Tools Needed:
Installing 8 in (203 mm) Wire Spool
Installing 4 in (102 mm) Wire Spool
When a slight force is needed
to turn spool, tension is set.
Retaining ring used
with 8 in (203 mm)
spool only.
Adapter used with 8 in
(203 mm) spool only.
803 012 / 803 013 -B / Ref. 802 971-C
Align locking hole in
spool with locking pin
on spool hub.