Filter
Top Products
OM-192 440 Page 13
2-9. Changing Input Voltage From 230 Volts To 200 Volts
Ref. ST-802 287
Cut cable ties as necessary.
1 230 Volt Transformer
Lead/Fan Lead
2 Black Switch Lead
3 Tubing
Locate lead marked 230 VAC.
Slide tubing down and disconnect
black switch lead from splice. Be
sure 230 volt transformer lead and
white fan lead remain spliced.
Fold tubing over 230 volt transform-
er/fan lead splice and secure.
4 200 Volt Lead
Locate lead marked 200 VAC.
Slide tubing down, and connect 200
volt lead stub to black switch lead
that was just disconnected from the
230 volt lead, and secure with exist-
ing hardware.
Slide tubing over connection and
secure.
Tools Needed:
1
2
4
5/16, 3/8 in
230 VAC
200 VAC
3
2-10. Electrical Service Guide
Input Voltage 200 230
Input Amperes At Rated Output 40 35
Max Recommended Standard Fuse Or Circuit Breaker Rating In Amperes 60 50
Min Input Conductor Size In AWG/Kcmil 8 10
Max Recommended Input Conductor Length In Feet (Meters) 108 (33) 94 (29)
Min Grounding Conductor Size In AWG/Kcmil 10 10
Reference: 1996 National Electrical Code (NEC) S-0092J