Filter
Top Products
OM-201 444 Page 15
3-7. Selecting And Preparing Weld Output Cables
10 ft (3 m)
1
Total Cable
Length In Weld
Circuit = 20 ft (6 m)
10 ft (3 m)
For Example,
2
4
3
2
Tools Needed:
sb6.1 11/92 – S-0653
1 Weld Output Cable
Determine total cable length in weld
circuit and maximum welding am-
peres. See Section 3-8 to select
proper cable size.
Use shortest cables possible.
Do not use damaged cables.
2 Terminal Lug
Use lugs of proper amperage
capacity and hole size for connect-
ing to work clamp, electrode holder,
and weld output terminals.
3 Insulated Electrode Holder
Install according to manufacturer’s
instructions.
4 Work Clamp
Install onto work cable.