Hobart Welding Products OM-4418 Welding System User Manual


 
OM-4418 Page 24
SECTION 8 − MAINTENANCE
8-1. Routine Maintenance
! Stop engine before maintaining.
. See Engine Manual and Maintenance Label
for important start-up, service, and storage
information. Service engine more often if
used in severe conditions.
Recycle engine
fluids.
n = Check Z = Change ~ = Clean l = Replace
* To be done by Factory Authorized Service Agent
Reference
Every
8
Hours
Section 5-3
n Fuel Level n Oil Level ~ Oil, Fuel Spills ~ Muffler Area
Every
25
Hours
Section 8-2
~ Air Cleaner Precleaner
Every
50
Hours
~ Weld Terminals Z Oil
Every
100
Hours
Engine
Manual,
Section 8-2
nl Air Cleaner Element ~ Cooling System n Spark Plug Gap
Every
200
Hours
l Unreadable Labels
Every
300
Hours
Engine
Manual
nValve Clearance*
Every
500
Hours
Engine
Manual
nl Weld Cables n~ Slip Rings*
nl Brushes*