Filter
Top Products
OM-945 Page 18
! Always wear a face shield,
rubber gloves and protec-
tive clothing when working
on a battery.
Remove battery from unit.
1 Vent Caps
2 Sulfuric Acid Electrolyte
(1.265 Specific Gravity)
3 Well
Fill each cell with electrolyte to
bottom of well (maximum).
! Do not overfill battery cells.
Wait ten minutes and check elec-
trolyte level. If necessary, add elec-
trolyte to raise to proper level.
Reinstall vent caps.
4 Battery Charger
! Read and follow all instruc-
tions supplied with battery
charger.
Charge battery for 12 minutes at 30
amperes or 30 minutes at 5 am-
peres. Disconnect charging cables
and install battery.
. When electrolyte is low, add
only distilled water to cells to
maintain proper level.
5-4. Activating The Dry Charge Battery (If Applicable)
1
Tools Needed:
2
4
30 A For 12 Minutes
5 A For 30 Minutes
OR
+
−
3
drybatt1 6/05 − S-0886
5-5. Connecting the Battery
Ref. 226 427-A / Ref. 802 341 / Ref. S-0756-D
1/2 in
Tools Needed:
+
−
! Connect negative (−)
cable last.