Filter
Top Products
OM-278 Page 14
3-4. Selecting A Location
1 Lifting Eye
2 Lifting Forks
Use lifting eye or lifting forks to
move unit.
If using lifting forks, extend forks
beyond opposite side of unit.
3 Rating Label (Non CE Models
Only)
Use rating label to determine input
power needs. Label located under
front access door.
4 Plate Label (CE Models Only)
Label located under front access
door.
5 Rating Label (CE Models
Only)
Use rating label to determine input
power needs. Label located on rear
access door
(see Section 2-5).
6 Line Disconnect Device
Locate unit near correct input
power supply.
Y Special installation may be
required where gasoline or
volatile liquids are present –
see NEC Article 511 or CEC
Section 20.
3
6
18 in
(460 mm)
18 in
(460 mm)
OR
1
2
Movement
Location And Airflow
4
5
3-5. Dimensions And Weights
Dimensions
C
D
Height 27-1/4 in (692 mm)
E
4 Holes
Width 22-1/4 in (565 mm)
Depth 36 in (914 mm)
A 35 in (889 mm)
B 1-1/4 in (32 mm)
A
C 21 in (533 mm)
D 1-3/16 in (30 mm)
E 7/16 in (11 mm) Dia
Weight
B
Ref. ST-153 556-A
650 Amp
Net: 545 lb (247 kg)
Ship: 561 lb (254 kg)