Honeywell 2020 Work Light User Manual


 
7 - 12
Mapping of Printed Bar Codes on page A-7), and scan the value and the Save
bar code from the Programming Chart on the inside the back cover of this man-
ual. The data characters should then appear properly.
Straight 2 of 5 Industrial (three-bar start/stop)
<Default All Straight 2 of 5 Industrial Settings>
Straight 2 of 5 Industrial
Straight 2 of 5 Industrial Message Length
Scan the bar codes below to change the message length. Refer to Message
Length Description (page 7-2) for additional information. Minimum and
Maximum lengths = 1-48. Minimum Default = 4, Maximum Default = 48.
Code 93 Code Page
On
* Off
Minimum Message Length
Maximum Message Length