Honeywell 2020 Work Light User Manual


 
2 - 22
Wand Emulation Delay Between Blocks
This sets the delay time between data blocks.
Default = 50ms.
Wand Emulation Overall Checksum
When this option is turned on, a computed check character is added at the end
of the entire message. The check character is the character which when Exclu-
sive-OR’d with every preceding character of the message yields a result of 0x00
(00H).
Default = Off.
5ms
500ms
* 50ms
150ms
Wand Emulation Overall
Checksum On
* Wand Emulation Overall
Checksum Off