Honeywell 2020 Work Light User Manual


 
4 - 6
Scan Stand Mode
When a unit is in Scan Stand mode, it remains idle as long as it sees the Scan
Stand symbol, below. When a different code is presented, the image scanner is
triggered to read the new code.
Note: The image scanner automatically adjusts the illumination LEDs to the
lowest light level possible to maintain a good lock on the Scan Stand
symbol. When a symbol is presented, the image scanner’s light levels
adjust to the saved setting (see LED Power Level on page 4-10). This
mode requires at least 50 lux of ambient light to operate correctly.
Scan Stand Symbol
When a unit is in Scan Stand mode, the LEDs shine at the Scan Stand symbol
on the base of the stand which tells it to remain idle.
When the Scan Stand
symbol is covered, the image scanner turns the LEDs on at the configured
power level (default setting is high) and attempts to find and decode bar codes
in its field of view.
Scan Stand Mode
Scan Stand Symbol