Filter
Top Products
14 – English
ASSEMBLY
How to change the clamping force
of the bar
Loosen the nut holding the
outher handle to the centre
nut.
Disassemble the outher
handle, centre nut, nut and
rubber washer. Position the
mark on the centre nut aligned
with the outher handle and
reassembles the rubber
washer and the nut.
After the adjustment, the
outher handle shall point
upwards when it has been
turned clockwise as far as
possible.
NOTICE! During all
reassembling, make sure that
the outer cover fits in to the
inner cover, the covers may
be damaged otherwise.
Check weather the handle feel
loose.
Turn the outer handle
clockwise as far as possible
and make a mark in the top
position of the centre nut. Turn
the outher handle anticlock-
wise to remove it.