Filter
Top Products
6 – English
SAFETY INSTRUCTIONS
GENERAL SAFETY INSTRUCTIONS
IMPORTANT INFORMATION!
Do not use the cut-off saw until you have read the
entire contents of this Operator’s Manual. All
servicing, in addition to the points listed in the section
”
Control, maintenance and service of the machine’s
safety equipment”
, should be carried out by trained
service specialists.
• Use the equipment recommended in the chapter
”Personal
protective equipment”.
• Never use the machine when you are tired, under the
influence of medicines/drugs or alcohol.
• Do not lend the cut-off saw to anyone without providing this
Operator’s Manual. Ensure the person using the cut-off saw
understands the information in this Operator’s Manual.
Storage
• Store the cut-off saw under lock and key so that it’s out of
reach for children and unauthorised persons.
3 Muffler
Never use a machine that
has a defective muffler.
Check regularly that the
muffler is secured to the
engine body.
!
WARNING! Never use a cut-off saw with
defective safety equipment. The cut-off saw’s
safety equipment should be checked and
maintained as described in this Operator’s
Manual. If your cut-off saw does not meet any
of these controls you should contact your
service workshop.
4 Throttle lock
1 Make sure the throttle
control is locked at the
idle setting when you
release the throttle lock.
2 Press the throttle lock and
make sure it returns to its
original position when you
release it.
3 Check that the throttle
control and throttle lock
move freely and that the
return springs work
properly.
4 Start the saw and apply
full throttle. Release the
throttle control and check
that the chain stops and
remains stationary. If the
chain rotates when the
throttle is on idle setting
you should check the
carburettor idle
adjustment. See the
section on
”Maintenance”
.