Filter
Top Products
20
1 KW - 230 v
70 63
MODEL
POWER
LEVEL
PRESSURE
LEVEL
VIBRATION
LEVEL
Lwa (dB)
EN ISO 3744
Lpa (dB)
ISO 4872
G 89/392/CEE
and 91/368/CE
This symbol indicates that the machine is
in conformance with the applicable
European directive.
The disc cutter is designed to provide safe and
reliable service in operating conditions corresponding
with the instructions, but it can present dangers for the
user and risks of damage, consequently regular on
site inspection is necessary to ensure :
• Perfect technical condition (use for the purpose
for which it is intended and taking into account any
risks, and correction of any malfunction detrimen-
tal to safety).
• Use of a diamond disc for water lubricated cutting
of marble, stone, granite, brick and facings (por-
celain, glazed tiles, ceramics, etc). The use of any
other disc is forbidden (abrasive, saw, etc).
• Competent personnel (qualifications, age, trai-
ning, education) who have studied the manual in
detail before starting work: any fault of an electri-
cal or other nature must be checked by a compe-
tent person (electrician, maintenance foreman,
authorized dealer, etc).
• That the warnings and instructions marked on the
machine are followed (adequate personal protec-
tion, correct use, general safety instructions, etc).
• That no modification, transformation or addition is
detrimental to safety and that it is carried out
without prior authorization from the manufacturer.
• Respect of the maintenance intervals and periodi-
cal checks recommended.
• That only genuine spare parts are used for
repairs.
• Use : Sawing porcelain, glazed tiles, ceramics,
etc...
1 Use
•Tools : Water lubricated diamond
disc diameter 200 mm - bore 25.4
mm (AL).
(Information from your usual
Diamant Boart supplier).
Do not use the saw for any purpose for which it
is not designed (using a saw blade or abrasive
disk which do not conform to the instructions
for use).
Saw blade
Carborundum
disc
2Technical specifications
• Motor speed : 2800 rpm
• Disc speed : 2800 rpm
• Electrical protection : IP 54
• Depth of cut (E) :
- at 90° : 40 mm
• Length of cut (L) :
- 660 mm - thickness 10 mm
• Useful width (w) : unlimited
• Dimensions (mm) L x W x H :
900 x 465 x 510
• Unladen weight : 29,5 kg
• Disc cooling by water spray into the disc casing.
• Minimum tank capacity :
- 15 l
•Water pump : adjustable flow
• Electricity supply :
- 230 V : H07-RNF 3 x 1
2
- L 2 m
90° TP
L
l
E
45°
E
P
Depending
on model
English
SPECIAL INSTRUCTIONS
Instruction plate
TYPE
TYPE SERIAL
FABRICATION
YEAR
WEIGHT POWER
VOLTAGE
FREQUENCY
INTENSITY
MAXI TOOL
BORE
SPEED
N° SERIE
ANNEE DE
FABRICATION
PUISSANCE
PLAGE DE
TENSION
FREQUENCE
INT. UTIL.
MASSE UTILE Kg kW
V
A
Hz
mm
mm
Ø MAXI OUTIL
Ø ALESAGE
T/MN - RPM
MANUFACTURER
POWER
VOLTAGE
±5 %
CURRENT
0,8 kW (1 CV) 230 V 50 Hz
4,5 A