Filter
Top Products
47083068_ed1 EN-1
EN
Product Safety Information
Intended Use:
Paint Sprayers are designed for paint, lacquer, stain or other nish type material.
For additional information refer to Product Safety Information Manual Form 16576563.
Manuals can be downloaded from www.ingersollrandproducts.com.
Product Specications
Model Description
Maximum
Air Pressure
Average Air
Consumption
Tool
Weight
Cup
Capacity
Fluid
Nozzle Size
200G
Touch-Up Gravity
Feed Spray Gun
35 psig
[2.4 bar]
5 cfm
[140 l/min]
1.2 lbs
[0.52 kg]
4.2 oz
[125 cc]
0.03 in
[0.8 mm]
210G
Gravity Feed
Spray Gun
60 psig
[4.1 bar]
11 cfm
[300 l/min]
2.6 lbs
[1.2 kg]
20 oz
[600 cc]
0.05 in
[1.4 mm]
270G
HVLP Gravity
Feed Spray Gun
40 psig
[2.8 bar]
8 cfm
[235 l/min]
2.7 lbs
[1.3 kg]
33 oz
[1,000 cc]
0.06 in
[1.5 mm]
210CSA
Suction Feed
Spray Gun
60 psig
[4.1 bar]
12 cfm
[340 l/min]
1.5 lbs
[0.62 kg]
33 oz
[1,000 cc]
0.07 in
[1.8 mm]
Operations
Spray Gun Handling
WARNING
Do not point the spray gun at anyone or at any part of the body.
NOTICE
Ensure appropriate air line lter is being used. Water, oil, and debris in the air may cause
damage to the workpiece.
The spray gun should be held perpendicular to the work surface and 6 to 12 inches from the
work surface. Keep the gun parallel to the work surface during the stroke to ensure even coating.
DO NOT move the gun in an arc. This will result in a build up of paint in the center of the stroke
and a light coating at each end.
Start the gun moving prior to pulling the trigger and release the trigger before stopping the gun
movement. Overlap strokes enough to get a uniform nish.
(Dwg. TP2049)
Fan Direction
Air Cap
Lock Ring
(Dwg. TP2053)