Support User Manuals

Invacare IOC100P Staple Gun User Manual

Open as PDF

of 24

SECTION 3—INSTALLING THE CONSERVING REGULATOR

Part No 1160840 13 Invacare® Element™

NOTE:Forinformationonhowtoope ratethecylinder,consultyour

equipmentpr ovider.

NOTE:Forthispr ocedur e,refertoFIGURE 3.1.

1. LoosenthecylinderpostvalveT‐Handle.

2. Lowertheconserv erov er

anyCGA870postvalve

cylinderwiththe

alignmentpinstow ardthe

holesonthe cylinderneck.

3. Alignthetwo pinsand

gasketwiththe

correspondingholeson

thecylinder postvalve.

FIGURE 3.1 Attaching the

IOC100P to the Cylinder

NOTE:CylinderpostvalveT‐Handle shouldbealignedwith

indentationonpostvalve.

4. Whileholdingtheunitinplace,tightenthecylinderpost

valvebytu rning clockwise.

5. Attachastandardcannula[7ft.(2.13m)orlessinlength]to

theoxygensupplyoutletfitting.

NOTE:Tightenonlybyhand.TheuseofatooltotightentheT‐Handle

maydamagetheunit.

previous next