Filter
Top Products
11
3. Loosen the bag clamp, and remove the
collector bag from the dust collector.
Empty the contents into a fire proof metal
container.
4. Attach a new bag using the bag clamp to
secure.
5. Connect the machine to the power source.
Note: Use the proper type hose to connect the
dust collector to the machine being operated.
Dryer vent hose is not acceptable for this
purpose. Contact your nearest JET distributor for
the full line of JET Dust Collector Hoses and
Accessories.
Motor
Make frequent inspections of the motor and
blow out (with low pressure air hose) or vacuum
any accumulation of foreign material in order to
maintain normal motor ventilation.
Electrical Connections
WARNING
All electrical connections must be done by a
qualified electrician. Machine must be
disconnected form the power source, unplug.
Failure to comply may cause serious injury!
If it is necessary to run this unit on 230V,
refer to the wiring diagram found on the inside
cover of the motor junction box.