Filter
Top Products
9
7. With the assistance of another person lift
the motor housing onto the upper stand.
8. From the underside attach the motor
housing to the upper stand using eight
M6x16 hex head bolts and eight M6 lock
washers (A, Fig. 7).
9. Attach the supporting bars (A, Fig. 8) to the
motor housing using two M8x16 cap screws,
two M8 flat washers, two M8 lock washers
and two M8 hex nuts (B, Fig.8).
10. Screw a M6 hex nut on the dust bag
hanger. Slip a M6 lock washer and a M6
flat washer onto the rod and screw into the
motor housing (A, Fig. 9).