Filter
Top Products
5
21. Make your workshop child proof with padlocks, master switches or by removing starter keys.
22. KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents. DON’T USE IN
DANGEROUS ENVIRONMENT. Don’t use power tools in damp or wet locations, or expose them to
rain. Keep work area well lighted. Keep the floor around the machine clean and free of scrap material,
oil and grease.
23. Keep visitors a safe distance from the work area. Keep children away.
24. Give your work undivided attention. Looking around, carrying on a conversation and “horse-play” are
careless acts that can result in serious injury.
25. Use only flanges furnished with the grinder.
26. Maintain a balanced stance at all times so that you do not fall or lean against the grinding wheels or
other moving parts. Do not overreach or use excessive force to perform any machine operation.
27. Use grinding wheel suitable for speed of grinder. Do not force a tool or attachment to do a job for
which it was not designed. The right tool will do the job better and safer.
28. DISCONNECT TOOLS before servicing; when changing accessories, such as blades, bits, cutters,
and the like. Use recommended accessories. Consult the owner’s manual for recommended
accessories. The use of improper accessories may cause risk of injury to persons. Improper
accessories may be hazardous.
29. Frequently clean grinding dust from beneath grinder. MAINTAIN TOOLS WITH CARE. Keep tools
sharp and clean for best and safest performance. Follow instructions for lubricating and changing
accessories.
30. Make sure the work piece is securely attached or clamped to the table. Never use your hand to hold
the work piece.
31. Turn off the machine before cleaning. Use a brush or compressed air to remove chips or debris — do
not use your hands.
32. Do not stand on the machine. Serious injury could occur if the machine tips over.
33. Never leave the machine running unattended. Turn the power off and do not leave the machine until it
comes to a complete stop.
34. Remove loose items and unnecessary work pieces from the area before starting the machine.
35. DON’T FORCE TOOL. It will do the job better and safer at the rate for which it was designed.
Familiarize yourself with the following safety notices used in this manual:
This means that if precautions are not heeded, it may result in minor injury and/or
possible machine damage.
This means that if precautions are not heeded, it may result in serious injury or possibly
even death.
- - SAVE THESE INSTRUCTIONS - -