4
Table of Contents Page
Warranty..................................................................................................................................................2
Warnings .................................................................................................................................................3
Table of Contents.....................................................................................................................................4
Specifications...........................................................................................................................................4
Unpacking and Clean-Up.........................................................................................................................5
Spindle & Insert Holders...........................................................................................................................5
Installing Spindles....................................................................................................................................5
Insert Plates ............................................................................................................................................5
Setup for 90° ...........................................................................................................................................6
Setup for Bevel Sanding ..........................................................................................................................6
Dust Collection ........................................................................................................................................6
Turning the Sander On & Off....................................................................................................................6
Removing Spindles..................................................................................................................................7
Changing Sanding Sleeves......................................................................................................................7
Replacement Sanding Sleeves ................................................................................................................7
Parts Breakdown ..................................................................................................................................8-9
Parts List ..........................................................................................................................................10-12
Specifications
JBOS-5.......................................................................................................................................... 708404
Table Size (in)....................................................................................................................14-1/2”x14-1/2”
Table Tilt (down)................................................................................................................................ 0-45°
Spindle Speed (rpm) ......................................................................................................................... 1,725
Oscillations (per minute) ........................................................................................................................30
Length of Oscillations (in).........................................................................................................................1
Motor (TEFC).................................................................................................................1/2 HP,1Ph,110V
Net Weight (lbs).....................................................................................................................................77
The specifications in this manual are given as general information and are not binding. JET Equipment
& Tools reserves the right to effect, at any time and without prior notice, changes or alterations to parts,
fittings, and accessory equipment deemed necessary for any reason whatsoever.