Filter
Top Products
6
39. Move the hands in an alternate motion from back to front as the work continues through the cut.
Never pass the hands directly over the cutter knife. As one hand approaches the knives remove it
from the stock in an arc motion and place it back on the stock in a position beyond the cutter knife
(Fig. 2).
40. At all times hold the stock firmly.
41. Do not use this jointer for other than it intended use. If used for other purposes, WMH Tool Group
disclaims any real or implied warranty and holds itself harmless for any injury or damage which may
result from that use.
Familiarize yourself with the following safety notices used in this manual:
This means that if precautions are not heeded, it may result in minor injury and/or
possible machine damage.
This means that if precautions are not heeded, it may result in serious injury or possibly
even death.
- - SAVE THESE INSTRUCTIONS - -
On-Off Switch Padlock
The jointer is equipped with a push-button
switch that will accept a safety padlock (see
figure – not included). To safeguard your
machine from unauthorized operation and
accidental starting by young children, the use of
a padlock is highly recommended. JET model
BP-1 (Stock No. 709012) is available from your
local authorized JET distributor or by calling
JET Equipment & Tools at the phone number on
the cover of this manual.
Model BP-1 On-Off Switch Padlock