Filter
Top Products
6
Introduction
This manual is provided by Walter Meier (Manufacturing) Inc., covering the safe operation and
maintenance procedures for a Model JWBS-14OS and JWBS-14CS Band Saw. This manual contains
instructions on installation, safety precautions, general operating procedures, maintenance instructions
and parts breakdown. This machine has been designed and constructed to provide years of trouble free
operation if used in accordance with instructions set forth in this manual. If there are any questions or
comments, please contact either your local supplier or Walter Meier. Walter Meier can also be reached at
our web site: www.waltermeier.com.
Specifications
Model Number: ...................................................... JWBS-14OS......................................... JWBS-14CS
Stock Number .............................................................. 708113.............................................. 708115K
Cutting Capacity (height/in.) .................................................... 6.......................................................... 6
Cutting Capacity (width/in.) .............................................. 13-1/2.................................................. 13-1/2
Minimum Blade Width (in.) ................................................... 1/8....................................................... 1/8
Maximum Blade Width (in.)................................................... 3/4....................................................... 3/4
Blade Length (in.) ........................................................... 93-1/2.................................................. 93-1/2
Blade Speed (SFPM) ........................................................ 3000.................................................... 3000
Table Size (in.) ..............................................................15 x 15.................................................15 x 15
Table Slot Size (DxW/in.) ............................................. 3/8 x 3/4............................................... 3/8 x 3/4
Table Height From Floor (in.) ................................................. 44.................................................. 43-1/2
Table Tilt (deg.) ..................................................45 right, 10 left......................................45 right, 10 left
Dust Port Diameter (in.)........................................................... 4.......................................................... 4
Overall Dimensions (HxWxD/in.) ............................. 68 x 34 x 20......................................... 68 x 26 x 19
Motor ............................... 3/4HP, 1Ph, 115/230V (prewired 115)....... 1 HP, 1Ph, 115/230V (prewired 115)
Net Weight (lbs.) ................................................................. 172...................................................... 185
Shipping Weight (lbs.) ......................................................... 183...................................................... 197
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, Walter Meier reserves the right to change specifications at any time and without
prior notice, without incurring obligations.