Filter
Top Products
3
Unpacking
Open shipping container and check that all parts
are intact. Report any damage immediately to
your distributor. Read the instruction manual
thoroughly for assembly and alignment
instructions.
Box contents:
1 Back Panel
2 Side Panels
1 Bottom Panel
1 Top Panel
3 Angle Brackets
2SmallShelves
1 Large Shelf (used with closed stand saws)
4 Leg assemblies
1 Hardware bag
1 Door Handle
2 Hinges
The contents of the hardware bag are drawn full
scale in Figure 1.
Installation
Tools required
• Phillips Screwdriver, or electric drill with
Phillips head driver.
• 7/16" and 3/8" wrenches, or socket
wrenches will make assembly easier.
The JET cabinet can be used as an optional
attachment to a router table or extension table
ontheJETtablesaws. Itmayalsobeusedasa
stand-alone router table. The extension table
must already be mounted before installing the
cabinet. Consult your XACTA™ Fence manual
for proper installation of the extension table.
Assembling the Cabinet
1. Place the back panel onto the floor as
showninFigure2. Note: You may need to
place a cloth beneath it to protect the
cabinet surface.
2. Flip up all the tabs on the fasteners that are
attached to each panel, see Figure 3.