Filter
Top Products
10 1/2-Inch Drill Operator's Manual
PREPARATION PRIOR TO OPERATION:
Before using the Electric Power Tool, complete the following preparations.
1. Extension cord:
When the work area is far away from the power source,use an extension cord of
sufficient thickness and rated capacity. The extension cord should be kept as short
as possible.
CAUTION: DAMAGED CORD MUST BE REPLACED OR REPAIRED.
2. Confirming condition of the environment:
Confirm that the work site is placed under appropriate conditions conforming to
prescribed precautions.
Functional Description
MODEL:
ET-3504-J 1/2-INCH DRILL
NAME OF PARTS:
(Fig. 1)
Preparation
NOTE: The information contained in this Instruction Manual is designed to assist you in
the safe operation and maintenance of the power tool.
NEVER operate, or attempt any maintenance on the tool unless you have first read and
understood all safety instructions contained in this manual.
Some illustrations in this Instruction Manual may show details or attachments
that differ from those on your own power tool
SPECIFICATIONS:
1/2-INCH DRILL ET-3504-J:
Motor Single-Phase, Series: Wound Commutator Motor
Power Source Single-Phase 115V AC/DC 60Hz
Current 6.2A
Capacity 1/2” (13mm) (Steel) 1-5/8” (40mm) (Wood)
No-Load Speed 550 rpm
Weight 6.6 lbs. (3kg)