Filter
Top Products
FUNCTIONAL DESCRIPTION
CONTROLS AND COMPONENTS:
1. On/Off Jumpstart Switch
2. Analog Pressure Gauge
3. Automotive Adapter
4. 12 Volt DC Accessory Outlet
5. Battery Charge Level Button
6. Battery Level Indicators
7. Work Light On/Off Switch
8. Work Light
9. Negative (Black) Jumper Cable
and clamp
9 10
DC ADAPTER:
To charge the jump-starter from a boat or car accessory receptacle, plug one end of
the included DC adapter into the receptacle and the other end into the accessory
socket on the jump-starter. Leave the vehicle running to prevent draining the vehi-
cle battery. Charge until the status indicator lights show green. DO NOT CHARGE
FROM A DC SOURCE FOR MORE THAN 4 HOURS. DAMAGE TO THE UNIT WILL
RESULT.
This method is not as effective as the AC method and should only be used if no AC
socket is available.
11
8
4
5
1
12
2
10. Positive (Red) Jumper Cable
and clamp
11. Compressor On/Off Power
Switch
12. Recharging Port
13. 260 PSI compressor air hose
and tire chuck
14. Inflation adapters (nozzles)
15. Changing Status Indicator
16. Clamps Reverse Polarity Indicator
17. AC/DC Charging Adapter
10
14
13
15
9
6
16
3
17
7