Filter
Top Products
SYMBOL NAME EXPLANATION
Diameter Size of Drill Bits,
Grinding Wheels, etc.
No load speed No-load Rotational Speed
.../min Revolutions per Minute Revolutions, Surface Speed,
Strokes, etc. per Minute
1,2,3, … Ring Selector Settings Speed, Torque or Position Settings
OPERATING INSTRUCTIONS
Parts of this Worklight heat up almost immediately when
in use. To avoid burns, use caution when handling light bulb and metal reflector.
Never change a hot light bulb. Bulb must be cool to the touch before attempting
to remove or replace it.
CONTROLS AND COMPONENTS:
1. Battery Pack
2. Release Buttons on Each Side
3. 120V AC Adapter
4. Charger
5. LED Charging Indicators
COMPONENT MODEL NUMBER
BATTERY PACK 690506
120V ADAPTER 690074
CHARGER 690072
CHARGING BATTERY PACK
CHARGE BATTERY PACK:
1. Make sure the trigger on
the Cordless Worklight
is in the “OFF” position
and remove the battery
pack from the Cordless
Worklight.
2. Plug the 120V AC adapter
into household outlet
and into side of battery
charger. Insert battery
pack into battery charger.
LED light will turn green
when battery pack is fully
charged (approx. 3 hours).
3. When fully charged, reattach battery pack onto Cordless Worklight, making
certain latches fasten securely. Cordless Worklight will not operate properly
if the battery pack is not seated properly.
SYMBOLS
IMPORTANT: Some of the following symbols may be used on your tool. Please
study them and learn their meaning. Proper interpretation of these symbols will
allow you to operate the tool better and safer.
SYMBOL NAME EXPLANATION
V Volts Voltage (Potential)
A Amperes Current
Hz Hertz Frequency (Cycles per Second)
W Watt Power
Kg Kilograms Weight
Alternating Current Type of Current
Direct Current Type of Current
Alternating or Direct Current Type of Current
Earthing Terminal Grounding Terminal
Class II Construction Denotes Double Insulation
min Minutes Time
s Seconds Time
7
6. ON/OFF Switch
7. Reflector Rim
ACCESSORIES:
8. Replacement Light bulb (inside unit)
6
7
8
2
1
3
4
5
BATTERY PACK
120V AC
ADAPTER
LED LIGHT
BATTERY
CHARGER