Filter
Top Products
9
1. Remove the battery pack from the
Worklight.
2. Hold the top of the Worklight with
one hand while twisting the rim in a
counter-clockwise direction with the
other. Continue turning until the rim
comes loose.
3. Remove the bulb by turning it
slightly and pulling it out of the bulb
fitting. Be careful not to damage the
delicate parts inside the case.
4. Insert the new bulb, then carefully
put the rim back in place and turn
it clockwise to tighten it.
MAINTENANCE AND CLEANING
Always remove the battery pack before attempting
cleaning or maintenance.
Use only mild soap and a damp cloth to clean the tool. Never let any liquid get
inside the casing. Never immerse any part of the tool in a liquid. Always keep the
ventilation openings clear.
Always clean the battery pack using only a dry cloth. Do not use liquids.
Always unplug the charger before cleaning it.
Regularly clean the ventilation slots in your tool and charger using only a soft
brush or dry cloth.
Never open the Worklight case, battery pack or charger. Do not attempt to repair
the Worklight, battery pack or charger yourself. Opening any of these parts will void
your warranty.
10
OPERATING THE ON / OFF SWITCH
Press the “ON/OFF” switch to turn the worklight “ON” and “OFF”.
ADJUSTING THE WORKLIGHT BEAM
Hold the handle of the Worklight securely in
one hand. With the other hand, swivel the
head of the Worklight counter-clockwise
until it is at the angle you desire. Swivel the
head of the Worklight clockwise to return it
to its original position.
REPLACING THE LIGHT BULB
This Worklight uses a Krypton 18V, 0.6 A light bulb. Use of any other kind of
light bulb may cause damage or injury.
Parts of this worklight heat up almost immediately when in use. To avoid
burns, use caution when handling light bulb and metal reflector. Never change
a hot light bulb. Bulb must be cool to the touch before attempting to remove or
replace it.
For your convenience, a spare light bulb is included
inside the unit. Unscrew the rim and carefully remove it from the light
assembly.
UP
REPLACEMENT
BULB