KitchenAid KEMI 377 Power Hammer User Manual


 
ELECTRIC BUILT-IN
MICROWAVE/SINGLE OVE
MODELS: KEMI 377
KEMS 375/376
KECO-375MS/376MCS
CMO-2743
INSTALLATION
INSTRUCTIONS
INSTALLER: FINAL CHECK LIST
IMPORTANT:
LEAVE THESE INSTRUCTIONS FOR USE BY
THE LOCAL ELECTRICAL INSPECTOR
PLACEMENT
‘-1 1. Properly positioned - level, aligned and square with cabinet opening.
1 2. Anchored securely to cabinet.
3. Installation debris removed.
ELECTRICAL
7 1. Oven properly grounded.
2. Separate 120/240 volt or 120/208 volt, 60 Hz, single phase branch circuit of proper
ampacity,
protected by a time-delay fuse or circuit breaker of proper size.
3. All connections made in accordance with National Electrical Code, ANSliNFPA 70-latest
edition and
local codes and ordinances.
OPERATIONAL
I 1. Oven racks installed and slide freely in all positions..
2. Knobs securely in place and rotate freely without rubbrng edges of control panel glass holes.
3. All lights function properly.
4 Refer to Use and Care Guide to set the electronic clock.
5 Door properly adjusted, opens and closes smoothly.
_ 6. Selector switch functions in all modes.
7. Unless instructed to leave for owner, remove all tags, labels and internal packing materials.
8. Oven has been wiped clean to remove fingermarks and other smudges.
9. Microwave oven operation checked according to procedure on back page of instructions.
THANK YOU INSTALLER:
1. Complete Installation Check Lrst
2. Leave all literature for customer.
3. Notify dealer that Installation is completed.
N
FOR DETAILED INSTRUCTIONS, FOLLOW METHODS DESCRIBED IN THIS FOLDER.