Filter
Top Products
8
SETTING THE CUTTING DEPTH
Please note! If possible we recommend that the cutting depth is set to 5 mm greater than the
material thickness. This should help to ensure you achieve a clean cut.
Release the wing nut on the depth adjuster ƻ, set the required depth on the scale and retighten
the wing nut.
SETTING THE CUTTING DISTANCE / PARALLEL GUIDE
Release the wing screw ¹ on the parallel guide ¸, using the marking set it to the required cutting
distance and retighten the wing screw.
STATEMENT OF CONFORMITY
We, Kompernaß Handelsgesellschaft mbH, Burgstr. 21, D-44867 Bochum, Germany, hereby
declare that this product conforms with the following EC regulations:
EC low voltage regulations, Electromagnetic compatibility, Applicable harmonised standards:
Description / Model type: PARKSIDE CORDLESS CIRCULAR SAW PAHKS 18 V
Bochum, 31.08.2002
Hans Kompernaß
- Managing Director -