Filter
Top Products
6 GB/IE/CY
Introduction
Pneumatic hammer drill with
chiselling action PEBH 1010
Q
Introduction
Please make sure you familiarise yourself
fully with the way the device works before
you use it for the first time and that you
understand how to handle electrical power tools
correctly. Further details can be found in the operating
instructions. Keep these instructions in a safe place.
If you pass the device on to anyone else, please
ensure that you also pass on all the documentation.
Q
Intended Use
The PEBH 1010 hammer drill is suitable for:
- hammer drilling in bricks, concrete and
natural stone
- drilling in wood, plastic and metal
- screwing in wood, plastic and metal
- chiselling in concrete, stone and plaster
Any other use of or changes to the device is consid-
ered to be inappropriate and harbours a consider-
able danger of accidents.
The manufacturer does not accept liability for damage
or losses occurring as a result of the device being
used for purposes other than those stated above.
The device is not intended for commercial use.
The following pictograms are used in these operating instructions / on the device:
Read instruction manual!
Device function selector switch
Observe caution and safety notes!
Chiselling
Caution – electric shock!
Danger to life!
Hammer drilling
Explosive material!
Drilling
Drill chuck, Made In Germany Chisel position adjuster
W
Watts (Effective power) Adjusting the chisel position
n
0
Rated idle running speed
Wear hearing protection, dust
protection mask, protective glasses
and protective gloves.
V
~
Voltage
Protect electrical power tools from
moisture!
Keep children away from electrical
power tools!
Check that the device, mains lead
and plug are in good condition!
Safety class II
Dispose packaging and appliance in
an environmentally-friendly way!
E3744_Hammer Drill_Content_LB3.indd 6 16.04.2008 8:26:21 Uhr