Filter
Top Products
2. UNPACKING AND CHECKING CONTENTS
Model 10-321 14” Band Saw is shipped complete in one box.
A.
Separate all parts from carton and check each item with Carton
Contents list below to make sure all items are accounted for, before
discarding any packing material.
B.
Remove the protective oil that is applied to the table. Use any
ordinary household type grease and spot remover.
C.
Apply a coat of paste wax to the table to prevent rust. Wipe all
parts thoroughly with a clean dry cloth.
ASSEMBLY
CARTON CONTENTS
Item Description Qty.
A Main Machine w/Blade Installed................................1
B Table..........................................................................1
C Package Containing Open Stand ...........................1
D Bag of Loose Parts for Main Machine........................1
E Upper Table Trunnion Assembly...............................1
F Bag of Loose Parts for Stand.................................1
G Operator’s Manual....................................................1
LIST OF LOOSE PARTS IN BAG
Item Description Qty.
5
1. TOOLS REQUIRED FOR ASSEMBLY
Item Description Qty.
Phillips Screwdriver................................1
Adjustable Wrench.................................1
Square...................................................1
A
B
C
D
E G
2-1/2” Dust port..........................................1
Hex Socket head cap screw M6x12..............2
Washer 6.........................................................2
Blade tension knob..........................................1
Crank handle...................................................1
Hex Nut M6.....................................................2
Hex Bolt M8x35..............................................1
Hex Nut M8.....................................................1
Wing nut M6.....................................................1
Tube.................................................................1
Washer 6.........................................................1
Hex Socket head cap screw M6x45..............1
Tool holder..................................................1
Pan head screw M5x10..................................2
M2.5 Hex “L”Wrench.....................................1
M3 Hex “L” wrench.........................................1
M4 Hex “L” wrench.........................................1
M5 Hex “L” wrench.........................................1
Hex Bolt, washer, nut assembly M8..................24
Hex Bolt, washer, nut assembly M6....................4
Rubber foot.........................................................4
Hex Bolt M8x16..................................................4
Lock washer 8.....................................................4
14” Bandsaw w/Open Stand
Owner’s Manual
For more information:
www.rikontools.com
or
info@rikontools.com
For Parts or Questions:
techsupport@rikontools.com
or
877-884-5167
Record the serial number and date of purchase
in your manual for future reference.
Serial number:
Date of purchase:
Part #10-321M1
Model: 10-321
F