Filter
Top Products
17
Section 6: Features & Benefits
PR1560 & PR1572 Powered Rakes 314-164M
Land Pride
7/14/08
Table of Contents
Section 6: Features & Benefits
Features
Benefits
Working widths 60”, 72”
Tractor Horsepower Range 30 - 40 HP
Cat. 2 driveline with
slip-clutch (primary shaft)
Slip-clutch offers protection to the gearbox and entire power train when a tough
obstruction is encountered with the roller.
3/4” x 1 1/2” Carbide ISC
Tuff Studs Roller
Carbide enhanced Tuff Studs are very tough, used in the mining industry, this offers a
long life to the studs. Studs can be replaced one at a time.
Scrolled roller available Scrolled roller will windrow rocks and other debris, leaving an excellent seedbed.
15 Degrees left or right angling By angling either direction, the user has many options on what direction to work his area.
Gauge wheels with sealant Tall and wide tires keep turning in fluffy soil. Sealant helps seal against punctures.
End plates with storage End plates can be used to hold dirt in which can aid in filling low spots. Easily store the
end plates on the Powered Rake. End plates are always with the Rake when needed.
Material control deflector Material control deflector is used to determine what size of material to let pass through
the roller, and what size to move out.
Replaceable skid shoes Skid shoes protect larger and vital parts of the unit. As they wear due to soil contact, they
can easily be replaced.
#50 Double continuous roller chain Double chain can take the fluctuation loads from the roller due to varying ground
conditions.
Drive chain enclosed in oil bath A small amount of oil keeps the chain and sprockets lubricated to keep abrasion to a
minimum.
1 Year gearbox warranty Shows our confidence in the gearbox integrity.