Filter
Top Products
Power Feed 10A Controller
www.lincolnelectric.com
[5]
A CLOSER LOOK
Single or Tandem Arc
Power Feed 10S (K2370-1)
(3/32 to 7/32 in. solid wire)
The Power Feed 10S is required to mount to a TC-3 undercarriage for
moving parts. It has many axes of rotation for ease of fixturing and locating.
Sturdy feed plate houses knurled drive rolls for positive accurate wire
feeding of large diameter welding wire (includes flux hopper, wire
straightener cross seam adjuster, head mounting hardware, and 2-5ft 4/0
weld cables).
(95:1 Gear Ratio Conversion Kit included.)
Power Feed 10SF (K2312-1)
(3/32 to 7/32 in. solid wire) Use the Power Feed 10SF for fixed hard
automation applications. Fixture mount wire drive assembly includes motor,
gearbox, drive rolls, guidelines and straightener (fixture builder's head with
wire straightener - insulators not included).
(95:1 Gear Ratio Conversion Kit included.)
TC-3 Travel Carriage (K325S, F, HCS or HCF)
The self-propelled travel carriage carries the wire feed head and Power Feed
10A in either direction on a beam. It can operate manually or automatically with
the weld controls. The TC-3 comes in two speed ranges (S and F) in
standard or high capacity (HC) models. The standard carriage is equipped for
one wire feed head, and the high capacity carriage is for multi-head systems.
• Standard Carriage – K3255S: 5-75 ipm (0.1-1.9 m/min.)
– K3255F: 15-270 ipm (0.4-6.9 m/min.)
• High Capacity Carriage – K325 HCS: 5-75 ipm (0.1-1.9 m/min.)
– K325 HCF: 15-270 ipm (0.4-6.9 m/min.)
Conversion Kit Power Feed 10SM (K2311-1)
For use with NA Series Gear Head. The ArcLink™ motor retrofit is used to
replace existing motor on NA-3/4 OR NA-5 wire feed head.
(95:1 Gear Ratio Conversion Kit included.)
Multiple Arc
Systems Interface (K2282-1)
This external controller is required for multi-arc applications. The arc-to-arc
interaction is controlled by offsetting the phase relationship in 90° increments,
as each arc is added.
Programmable Logic Controller (PLC)
The Power Wave AC/DC 1000 and Power Feed 10A can easily integrate
into a customer-supplied PLC system. Motion of the TC-3 travel carriage
can be controlled from the PLC, while individual weld controls such as
mode selection, amperage, and voltage are still controlled from the
Power Feed 10A.
Multi-Arc System
Interface (K2282-1)
Power Feed 10SM
Motor (K2311-1)
Power Feed
10SF (K2312-1)
Power Feed 10S
(K2370-1)
The Power Feed 10S series of Automatic Wire Drives are specially designed for hard automation, submerged arc welding. The heavy-duty
gear box and feed plate are well-known in the industry for years of reliable performance. Now featuring a new high-torque, permanent
magnet motor with more power and even more reliable performance under high heat conditions, The Power Feed 10S series wire drives are
the most rugged in the industry.
SYSTEM CONFIGURATION
Mounting and Motion Controls
TC-3 Travel
Carriage
(K325S, F, HCS
or HCF)