Filter
Top Products
Power Feed 10M
[7]
RECOMMENDED OPTIONS
GENERAL OPTIONS
Magnum® Gas-Shielded Gun&Cable
Assemblies
Available 200-550 amps, air-cooled, gas-
shielded welding guns. Dual procedure
capability with gun trigger lock available
on 400 amp gun.
See bulletin E12.10
Magnum® Self-Shielded Gun&Cable
Assemblies
Available 250-600 amps.
See bulletin E12.110
Push-Pull Guns
The Python®, CobraMAX™ and Prince®
XL provide optimum push-pull
performance at a variety of amperages.
Available in air-cooled or water-cooled
models.
Order K2297-X, K2212-X, and K2252-X
Push-Pull Gun Connection Kit
Required for aluminum welding with the
Prince XL, Python and CobraMax air or
water-cooled push-pull guns. Includes
power block, gun bushing, gas hose
adapter, torch gas bypass valve (required
for Prince XL Gun only), and wire reel
brake limiter. Requires aluminum drive
roll kit.
Order K2339-1
Dual Procedure Switch
Allows the use of two welding procedures
with each Lincoln Magnum gun
connected to an LN-10, DH-10 or Power
Feed 10M Bench or Boom model.
15 ft. (7.6m).
Order K683-3
ArcLink “T” Connector Kit
For connecting multiple feeders to a
single power source.
Order K2429-1
Foot Amptrol® Connector Kit
Provides 25 ft. (7.6m) of remote ouput
control for TIG welding. (6 pin plug
connection).
Order K2320-1
Wire Straightener
For Lincoln Electric 10 series wire feeders.
Straightens wire for better, smoother
feeding.
Order K1733-1
Spindle Adapter for 14 lb. (6 kg)
Innershield® Coils
Permits 14 lb. (6 kg) Innershield electrode
coils to be mounted on 2” (51 mm) O.D.
spindles.
Order K435
Spindle Adapter for 8” O.D. Spools
Permits 8” (200mm) O.D. spools to be
mounted on 2” (51mm) O.D. spindles.
Order K468
GENERAL OPTIONS
30 lb. (14 kg) Readi-Reel® Adapter
Adapts 22-30 lb. (10-14 kg) Lincoln
Readi-Reels of electrode to 2” (51mm)
spindle.
Order K363P
Wire Reel Cover Kit
Plastic enclosure for up to 44 lb.
(20 kg) wire packages.
Order K1634-1
50-60 lb. Readi-Reel® Adapter
Adapts 60 lb. (27.2 kg) coils of Lincoln
electrode to 2” (51mm) spindle.
Order K438
50-60 lb. Coil Adapter
Adapts 50-60 lb. (22.6-27.2 kg) coils of
Lincoln electrode to 2” (51mm) spindle.
Order K1504-1
Plastic Wire Cover
Plastic enclosure for up to 60 lb.
(27.2 kg) wire packages.
Order K1634-2
Incoming Bushing for Lincoln
Conduit
Feed Plate Incoming Bushings connect
directly to wire conduit (not included),
for use in boom system, long
distances, or large payoff packages.
Bushings can be used with any wire
conduit (K515 or K565).
Order K1546-1 for .025-1/16” wire
Order K1546-2 for 1/16-1/8” wire
Gas Guard Regulator
For CO
2
and Argon blend gases.
Reduces surge caused by excess
pressure in supply hose. Includes
adjustable flow regulator with
removable adjustor key.
Order K659-1
Water Connection Kit
Includes fittings for use with water-
cooled guns and Magnum Coolers. Kit
provides for one gun.
Order K590-6
Magnum Flow Sensor
Rotary Flow Sensor with Leads
monitors water cooling flow and shuts
off power to gun if water stops.
Order K1536-1
Caster Kit — Light Duty
Mounts to the Universal Wire Reel
Stand. Allows for easy movement of
wire feeder.
Order K1556-1
6000 Series Welding Arm
Create a safe, uncluttered work
environment where floor space is
used effectively with a Lincoln Series
6000 Welding Arm. Glide the arm
effortlessly into position when in use
or swing it conveniently against a wall
or beam for safe, out-of-the-way
storage. An 18” x 18” (457 x 457mm)
footprint ties up very little floor space.
Order K1778-1
www.lincolnelectric.com