Filter
Top Products
POWER FEED 10M BENCH MODEL K2230-1
POWER FEED 10M DUAL BENCH MODEL K2234-1
RECOMMENDED GENERAL OPTIONS
ArcLink/Linc-Net Control Extension Cables See table on page 6
Weld Power Cables See table on page 6
Coaxial Weld Power Cables See table on page 6
Feed Plate Gun Receiver Bushings See table on page 6
Drive Roll and Wire Guide Kits See table on page 6
Magnum Gun and Cable Assemblies See publication E12.10
Magnum Self-Shielded Gun and Cable Assemblies See publication E12.110
Push-Pull Guns K2297-X, K2212-X, K2252-X
Push-Pull Gun Connection Kit K2339-1
Dual Procedure Switch K683-3
ArcLink “T” Connector Kit K2429-1
Foot Amptrol Connector Kit K2320-1
Wire Straightener K1733-1
Spindle Adapter for 14 lb. Innershield Coils K435
Spindle Adapter for 8” O.D. Spools K468
30 lb. Readi-Reel Adapter K363P
Wire Reel Cover Kit K1634-1
50-60 lb. Readi-Reel Adapter K438
50-60 lb. Coil Adapter K1504-1
Plastic Wire Cover K1634-2
Incoming Bushing for Lincoln Conduit:
- for .025-1/16” wire K1546-1
- for 1/16-1/8” wire K1546-2
Gas Guard Regulator K659-1
Water Connection Kit K590-6
Magnum Flow Sensor K1536-1
Caster Kit - Light Duty K1556-1
6000 Series Welding Arm K1778-1
ADDITIONAL OPTIONS FOR SINGLE BENCH MODEL
Dual Procedure/Memory Panel K2360-1
Swivel Platform K1557-1
Insulated Lift Bail K1555-1
RECOMMENDED POWER SOURCE OPTIONS
Power Wave 355M see publication E5.146
Power Wave 455M and 455M/STT see publication E5.161
Power Wave 655 Robotic see publication E10.95
TOTAL:
THE LINCOLN ELECTRIC COMPANY
22801 St. Clair Ave., Cleveland, OH 44117-1199 • 216.481.8100 • www.lincolnelectric.com
POWER FEED 10M ORDER FORM
PRODUCT DESCRIPTION ORDER NUMBER QUANTITY PRICE
CUSTOMER ASSISTANCE POLICY
The business of The Lincoln Electric Company is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the needs of our customers and to exceed their
expectations. On occasion, purchasers may ask Lincoln Electric for advice or information about their use of our products. We respond to our customers based on the best information in our possession at that time. Lincoln Electric
is not in a position to warrant or guarantee such advice, and assumes no liability, with respect to such information or advice. We expressly disclaim any warranty of any kind, including any warranty of fitness for any customer’s
particular purpose, with respect to such information or advice. As a matter ofpractical consideration, we also cannot assume any responsibility for updating or correcting any such information or advice once it has been given, nor
does the provision of information or advice create, expand or alter any warranty with respect to the sale of our products.
Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility of the customer. Many variables beyond the
control of Lincoln Electric affect the results obtained in applying these types of fabrication methods and service requirements.
Subject to Change — This information is accurate to the best of our knowledge at the time of printing. Please refer to www.lincolnelectric.com for any updated information.
ADDITIONAL OPTIONS FOR SINGLE
BENCH MODEL
Dual Procedure/Memory Panel
Weld procedures are saved into memory for future
use. Option on Power Feed 10M Single Bench and
Boom.
Order K2360-1
Swivel Platform
Mounts to the lift bail on the power source and
bottom of the Universal Wire Reel Stand. Wire feeder
may be lifted off if needed. Compatible with Light Duty
Caster Kit. Includes “lazy susan” parts tray.
Order K1557-1
Insulated Lift Bail
Allows the entire wire feeder to be hung from a crane
or hook. Use with Universal Wire Reel Stand.
Order K1555-1