Lincoln Electric 11135 Welder User Manual


 
E-6
TROUBLESHOOTING
CLASSIC 300G
E-6
If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your
Local Lincoln Authorized Field Service Facility for technical troubleshooting assistance before you proceed.
CAUTION
PROBLEMS
(SYMPTOMS)
POSSIBLE AREAS OF
MISADJUSTMENTS(S)
RECOMMENDED
COURSE OF ACTION
Engine does not start
Irregular running of the Engine.
Engine stops running During
Operation and the Engine
Protection Light Does Turn On.
(Solid Light)
1. Faulty Ignition switch
2.
Insufficient charging or complete
discharge of the battery
Charge.
3. Lack of fuel or air mixed in the
fuel system.
2. Clogged fuel filter.
4. Irregular and faulty fuel supply
(Injector pump trouble)
5. Moisture or carbon on spark
plugs.
6. Improper viscosity of the lubri-
cating oil.
7. Clogged air cleaner.
8. No compression.
9. Engine protection light is ON.
1. Air mixed in the fuel system.
2. Uneven fuel injection (Faulty fuel
injector pump).
3. Clogged fuel filter.
4. Defective governor.
5. Engine itself defective.
1. Lack of fuel in the tank.
2. Clogged fuel filter.
3. Air mixed in the fuel system.
4. Lack of Engine Oil.
5. Fault in oil pressure switch.
6. Oil leakage from the lubricating
system.
7. Clogged oil filter.
8. Oil too light.
9. Faulty TBI controller.
10. Faulty function of the engine.
If all recommended possible areas
of misadjustment have been
checked and the problem persists,
Contact your local Lincoln
Authorized Field Service Facility.
Observe all Safety Guidelines detailed throughout this manual