Lincoln Electric 11135 Welder User Manual


 
E-7
TROUBLESHOOTING
CLASSIC 300G
E-7
If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your
Local Lincoln Authorized Field Service Facility for technical troubleshooting assistance before you proceed.
CAUTION
Observe all Safety Guidelines detailed throughout this manual
PROBLEMS
(SYMPTOMS)
POSSIBLE AREAS OF
MISADJUSTMENTS(S)
RECOMMENDED
COURSE OF ACTION
Engine Stops During Operation and
the Engine Protection Light Does
Turn On. (Flashing)
White or Blue Smoke.
Dark Smoke
Faulty Charging
Starter Motor does not run.
Engine Knocking.
Lack of Power.
1.
Lack of Coolant.
2. Loose or slipping fan belt.
3. Damaged fan belt.
1. Excess engine oil.
2. Too low viscosity of the engine
oil.
1. Excess injection.
2. Clogged air cleaner.
3. Faulty function of the engine.
1. Loose fan belt.
2. Faulty wiring.
3. Faulty battery.
4. Worn out alternator brush.
1. Loose or damaged wiring.
2. Low Battery voltage.
3. Damaged starter motor.
1. Poor grade of Gasoline.
2. Spark advance to far.
1. Carbon deposits causing pre-
ignition.
2. Incorrect timing.
If all recommended possible areas
of misadjustment have been
checked and the problem persists,
Contact your local Lincoln
Authorized Field Service Facility.