Filter
Top Products
C-1
ACCESSORIES
C-1
RANGER 10,000 PLUS AND RANGER 10,000
OPTIONAL EQUIPMENT (Field Installed)
K957-1 HEAVY DUTY, TWO WHEEL TRAILER FOR
SMALL WELDERS - For road, off-road and in-plant
and yard towing. (For highway use, consult applicable
federal, state and local laws regarding requirements
for brakes, lights, fenders, etc.)
Order K957-1 Trailer
K958-1 Ball Hitch
K958-2 Lunette Eye Hitch
K959-2 Fender & Light Kit
K965-1 Cable Storage Rack
K889-2 & -3 Two-Wheel Undercarriage - For moving
by hand. Overall Width 29 in (.74m) Both have pneu-
matic tires. Puncture proof tires included with K889-3.
K1737-1 FOUR WHEEL ALL-TERRAIN UNDER-
CARRIAGE - For moving by hand at construction
sites. Heavy duty puncture resistant pneumatic tires.
K1770-1 UNDERCARRIAGE (FACTORY) - For mov-
ing by hand on a smooth surface. Heavy duty punc-
ture resistant pneumatic tires and front caster.
K1745-1 WELDING GAS CYLINDER LPG TANK
HOLDER
Holds Welding Gas Cylinder for use on K1770-1
Undercarriage. One or two may be installed on an
undercarriage.
K1788-1 ROLL CAGE - Gives added damage protec-
tion.
Attaches to K1737-1, K1770-1, and K957-1.
K886-1 Canvas Cover -To protect the RANGER
10,000 PLUS AND RANGER 10,000 when not in use.
Made from attractive red canvas material which is
flame retardant, mildew resistant, and water repellent.
K802R Power Plug Kit- provides four 120V plugs
rated at 15 amps each and one dual voltage, Full
KVA plug rated at 120/240V, 50 amps.
K802N Power Plug Kit - Provides four 120V plugs
rated at 20 amps each and one dual voltage, full KVA
plug rated at 120/240V, 50 amps.
K894-1 Spark Arrester Kit - Includes a heavy gauge
steel, approved spark arrester and clamp for easy
mounting to muffler exhaust pipe.
K1690-1 GFCI RECEPTACLE KIT - Includes one UL
approved120V ground fault circuit interrupter duplex type
receptacle with cover and installation instructions.
Replaces the factory installed 120V duplex receptacle.
Each receptacle of the GFCI Duplex is rated at 20 Amps,
the maximum total current from the GFCI Duplex is limit-
ed to the 20 Amps. Two kits are required.
K1816-1 FULL KVA ADAPTER KIT - Plugs into the
120/240V NEMA 14-50R receptacle on the case front
(which accepts 4-prong plugs) and converts it to a
NEMA 6-50R receptacle, (which accepts 3-prong
plugs.)
T12153-9 Full-KVA Power Plug - One dual voltage
plug rated at 120/240V, 50 amps.
K930-2 TIG Module - Provides high frequency and
shielding gas control.for AC and DC GTAW (TIG)
welding applications. Its compact case is designed foe
easy carrying, complete with a handle. High frequency
bypass is built in requires K938-1 Contactor Kit, K936-
4 Control Cable, and K814 Arc Start Switch.
K938-1 Contactor Kit - For use with TIG Module,
Provides a “cold” electrode until the triggering device
(Arc Start Switch) is pressed.
K936-4 Control Cable - Connects TIG Module to
Ranger 10,000.
K814 Arc Start Switch - Attaches to the TIG torch for
convenient finger control.
K937-45 Control Cable Extension - Allows TIG
Module to be operated at distances up to 200ft. from
the power source. Available in 45ft. (13.7m).
K939-1 Docking Kit - For Mounting the K930-2 TIG
Module on top of the Ranger 10,000.