Filter
Top Products
(($'(
'#'Q
'$""#W&*%"#)
()
K704 Accessory Kit- (400 AMP Capacity) which
includes:
• Electrode Holder & Cable
• Work Clamp & Cable
• Headshield
K875 Accessory Kit- (150 AMP Capacity)
,'W
!# - Includes internal contactor for across
the arc operation (no control cable). Provides “cold”
electrode until gun trigger is pressed. Includes gas
solenoid.
LN-15 Across the Arc Model
Magnum Gun and Magnum Gun Connector Kit are
required for gas-shielded welding. Innershield Gun is
required for gasless welding.
Magnum 350 Innershield Gun
Magnum 300 MIG Gun (for LN-25)
Magnum 300 MIG Gun (for LN-15)
Gun Receiver Bushing (for LN-15 & K126-2)
)
Magnum™ TIG Torch
TIG Torch
%Magnum Parts Kit and Argon Gas
)"?4E<5 - Provides high frequency and shield-
ing gas control.for AC and DC GTAW (TIG) welding applica-
tions. Its compact case is designed foe easy carrying, com-
plete with a handle. High frequency bypass is built in
Requires Contactor Kit, Control Cable, and
Arc Start Switch.
Contactor Kit - For use with TIG Module, Provides a
“cold” electrode until the triggering device (Arc Start Switch)
is pressed.
Control Cable - Connects TIG Module to RANGER®
225.
Optional TIG Equipment:
Docking Kit - For Mounting the K930-2 TIG Module
on top of the RANGER® 225.
Control Cable Extension - Allows TIG Module to be
operated at distances up to 200ft. from the power source.
Available in 45ft. (13.7m).
Arc Start Switch
%<1C=1
Pro-Cut 55
(Requires Full KVA Adapter )