Filter
Top Products
(($'(
'#'Q-)
$%)$#!&*%"#) (Field Installed)
+.*).),$,!)'!'$'
("!!,!'(For road, off-road and in-plant
and yard towing. (For highway use, consult applicable
federal, state and local laws regarding requirements
for brakes, lights, fenders, etc.)
Order K957-1 Trailer
K958-1 Ball Hitch
K958-2 Lunette Eye Hitch
K959-2 Fender & Light Kit
K965-1 Cable Storage Rack
$*',!!!)''#*#'
''For moving by hand at construction
sites. Heavy duty puncture resistant pneumatic tires.
*#''')$'. - For mov-
ing by hand on a smooth surface. One or two gas
cylinders can be mounted on the rear of the undercar-
riage with the installation of K1745-1 Cylinder
Holder(s). Heavy duty puncture resistant pneumatic
tires and front caster.
,!#(.!#'!%)#
$!'
Holds Welding Gas Cylinder for use on K1770-1
Undercarriage. One or two may be installed on an
undercarriage.
'$!!- Gives added damage protection.
Attaches to K1737-1, K1770-1, and K957-1.
1>F1C?F5B -To protect the Ranger® 250
GXT when not in use. Made from attractive red can-
vas material which is flame retardant, mildew resis-
tant, and water repellent.
' %?G5B%<E7 9D - provides four 120V plugs
rated at 15 amps each and one dual voltage, Full
KVA plug rated at 120/240V, 50 amps.
#%?G5B%<E7 9D- Provides four 120V plugs
rated at 20 amps each and one dual voltage, full KVA
plug rated at 120/240V, 50 amps.
6D=?B 6D=
'5=?D5?>DB?<- Portable control provides same dial range
as the output control on the welder. Has a convenient 6-pin
plug for easy connection to the welder.
335CC?BI 9D- Includes 35 ft (10.7m) 2/0 AWG elec-
trode cable, 30 ft. (9.1m) 2/0 AWG work cable, headshield
with No. 12 filter, GC300 work clamp and Cooltong® 300
electrode holder. Cables are rated at 300 amps, 100% duty
cycle.
335CC?BI 9D For Stick welding. Includes
20ft.(6.1m)#6 electrode cable with lug. 15ft.(4.6m)#6 work
cable with lugs, headshield, filter plate, work clamp, elec-
trode holder and sample pack of mild steel electrode. 150
amp capacity.
(@1B;BB5CD5B 9DAttaches between muffler
and exhuast elbow. Virtually eliminates spark emissions.
'%)! ) - Includes one UL
approved120V ground fault circuit interrupter duplex type
receptacle with cover and installation instructions.
Replaces the factory installed 120V duplex receptacle.
Each receptacle of the GFCI Duplex is rated at 20 Amps,
the maximum total current from the GFCI Duplex is limit-
ed to the 20 Amps. Two kits are required.
*!! +%)' )Plugs into the
120/240V NEMA 14-50R receptacle on the case front
(which accepts 4-prong plugs) and converts it to a NEMA 6-
50R receptacle, (which accepts 3-prong plugs.)
) Full-KVA Power Plug - One dual voltage plug
rated at 120/240V, 50 amps.